If you’re looking into Govee light mounting options, you’ve probably already realized that how you mount them matters just as much as the lights themselves. A bad install can lead to sagging wires, peeling tape, and a setup that looks rough during the day.
In this post, we compare the three most common Govee light mounting options: adhesive tape, plastic clips, and aluminum track. By the end, you’ll know which is right for your home, your climate, and your standards
Key Takeaways
- Compare three common Govee light mounting options: tape, clips, and aluminum track
- Understand the pros and cons of each method
- Learn which option gives the best long-term results
Option 1: Adhesive Tape
Govee includes pre-applied 3M-style adhesive with many of its RGBIC Permanent Outdoor Lights. On paper, it sounds simple: peel, stick, done.
Pros:
- Quick and tool-free to install
- No hardware or drilling required
- Easy to test or reposition temporarily
Cons:
- Fails in cold, heat, or moisture
- Doesn’t stick well to textured or dusty surfaces
- Tape residue is difficult to remove
- Wires and light heads stay fully exposed
If you’ve experienced this failure already, check out 3M Tape Not Sticking on Govee Lights? Here’s the Fix for more on why it happens.
For reference, you can view Govee’s official installation instructions on their product page to see how they recommend mounting their lights.
Option 2: Plastic Clips
Clips come included in most Govee lighting kits. They’re better than tape in some ways, but still have major limitations.
Pros:
- More secure than adhesive in some setups
- Reusable and adjustable
- No sticky residue to clean
Cons:
- Can crack or loosen over time
- Spacing is inconsistent if not measured carefully
- Can look bulky or uneven from a distance
- Still leaves wires exposed
If you’re comparing Govee light mounting options and care about appearance, clips may feel like a compromise.
Option 3: Aluminum Track (The Clean Upgrade)
Want a setup that looks like it was professionally installed? Aluminum mounting track is the gold standard of Govee light mounting options. Shop here for Govee-Compatible Aluminum Track.
Pros:
- Snaps Govee lights into place securely
- Conceals wires and light heads for a clean look
- Holds up to weather (rain, snow, heat, wind)
- Installs on most surfaces (fascia, siding, even brick)
Cons:
- Requires basic tools (drill, level)
- Higher upfront cost than clips or tape
For a full guide on how to install it, see How to Mount Govee Lights Cleanly
Govee Light Mounting Options: Side-by-Side Comparison
| Feature | Tape | Clips | Aluminum Track |
|---|---|---|---|
| Ease of install | ✅ Easiest | ✅ Easy | ⚠️ Moderate |
| Clean appearance | ❌ No | ❌ Minimal | ✅ Yes |
| Weather resistance | ❌ Weak | ⚠️ Okay | ✅ Strong |
| Wire concealment | ❌ None | ❌ None | ✅ Full |
| Long-term durability | ❌ Low | ⚠️ Medium | ✅ High |
If you’re serious about your setup, track offers the best balance of function and finish.
Final Thoughts: Choose the Mount That Matches Your Goals
Your choice of mounting method depends on what you value most: speed, simplicity, or a clean, long-lasting result. Here’s a quick guide:
- Use tape if you’re doing a temporary install and don’t mind redoing it later
- Use clips if you’re okay with some visible hardware and want an easy setup
- Use track if you want the cleanest look with the fewest long-term problems
Still unsure? Start with our Best Track for Govee Lights post to learn why it’s become the go-to solution.
FAQ: Questions about mounting options for govee lights
What are the best Govee light mounting options for cold climates?
Tape often fails in cold weather. Clips do okay, but aluminum track holds up best long-term.
Can I install aluminum Track Myself?
Yes. Most DIYers complete it with basic tools in a few hours.
Is your track compatible with all Versions of Govee’s Permanent Outdoor Lights?
As of June 2025, it’s only compatible with the v1, v2, and elite versions. WE are planning on introducing some track for the Pro versions as well, so by the time you read this we might already have it.
What if I’ve already installed the lights?
No problem! You can always change up how you install them. If you notice the tape isn’t working, upgrade to the clips that come with their kits. If you want to go all out with aluminum track, you can simply remove the lights and pop them into the channel.