If you’re dealing with Govee lights falling down, peeling off, or sagging after a few weeks, you’re not alone. The lights are great. The adhesive? Not so much.
This post is your go-to guide for why it happens, how to fix it, and most importantly, how to prevent it from happening again.
Key Takeaways
- Discover why Govee Permanent Outdoor Lights often fall off or sag after installation.
- Learn practical DIY solutions to secure them permanently.
- Explore the best mounting option to prevent future problems.
Why Are My Govee Lights Falling Down?
Here are the top reasons we hear from DIYers:
- 3M tape doesn’t hold up in weather. Heat, rain, and cold weaken the bond fast.
- Improper surface prep. If the area wasn’t cleaned well, adhesion suffers.
- Clip fatigue. Govee’s included clips can crack or pop off over time.
- No soffit or mounting surface. If your roofline is bare, clips have nowhere to go.
Even with a solid install, outdoor elements eventually take their toll, especially in places with major weather swings.
Quick Fixes (If You’re in a Bind)
Need a short-term solution? Try these quick fixes:
- Re-stick with heavy-duty outdoor tape like Gorilla or 3M VHB.
- Add zip ties if mounting to gutters or pipes.
- Use extra Govee clips to reinforce sagging sections.
These options may help temporarily, but they won’t last. Tape peels. Clips fail. You’ll likely be back on the ladder before long.
The Permanent Fix: Use a Mounting Track
The best way to stop Govee lights falling down is to stop relying on tape and clips.
Instead, use a custom aluminum mounting track made specifically for Govee Permanent Outdoor Lights. Here’s why it works:
- Hides wires and light heads for a clean, professional look.
- Protects from wind, water, and sun exposure.
- Screws into fascia or siding for a secure, long-lasting hold.
- Snap-in design keeps lights firmly in place.
Want to see how it works? Check out the best track for Govee lights here.
For a full breakdown of features and why it’s the best option, see our full guide: Best Track for Govee Permanent Outdoor Lights
How to Install the Track (It’s Easier Than You Think)
- Cut a short guide piece from the back channel.
- Mark a straight line using a chalk line or level.
- Screw in the back channel along your path.
- Snap Govee lights into the front track.
- Click the front into the back channel and you’re done.
Most installs take just a few hours and are totally DIY-friendly.
Bonus: Your Lights Will Look Better, Too
Besides fixing the big issue of Govee lights falling down, track gives your install a clean, finished appearance. No exposed wires. No sag. No mess. Just a neat row of glowing LEDs.
It’s a year-round improvement, not just for holidays.
Where to Buy the Mounting Track
Our mounting track is available now and ships fast. It’s powder-coated aluminum, built to last, and made to fit Govee Permanent Outdoor Lights.
👉 Shop Now
If you’re still in the research phase of what permanent lights to get and want a high-quality solution, check out ShawTech Lighting’s Permanent Christmas Light DIY Kits.
Frequently Asked Questions
Will this work with my Govee Permanent Outdoor Lights?
Yes. It’s designed for Govee Permanent Outdoor Lights and matches their spacing and size.
Can I mount this if I don’t have a soffit?
While it’s ideal to have a soffit or some sort of overhang, you can mount them to the siding, brick (assuming you have the right anchors), or just about anywhere you want. You may need some additional hardware such as L brackets to rotate the channel so that it mounts with them facing downards.
Do I need any special tools?
Just the basics: screwdriver, tin snips or a saw (for cutting track), level, and screws.
Is this better than using the included 3M tape or clips?
Definitely. It performs better, lasts longer, and looks cleaner.