Aluminum Track for ASAHOM Permanent Outdoor Lights
Price range: $137.50 through $550.00
Free shipping on orders over $200
This aluminum track is designed specifically for ASAHOM Pro (S1080) permanent outdoor lights. It creates a straight, secure mounting channel that keeps each light aligned and firmly supported along your soffit.
Designed exclusively for ASAHOM Pro (S1080) permanent outdoor lights.
Not compatible with non-pro ASAHOM models.
At $2.75 per foot, this ASAHOM Pro aluminum track delivers a clean, professional permanent outdoor lighting install without inflated pricing. Orders over $200 ship free anywhere in the U.S., and most orders leave our Utah warehouse within 1–2 business days.
Sizing Note
Track kits are matched to ASAHOM Pro Permanent Outdoor Light kits in 50 ft, 100 ft, 150 ft, and 200 ft lengths.
Each aluminum section is 31.5 inches long, so the total assembled track length is slightly shorter than the labeled light kit length.
Approximate track coverage:
• 50 ft kit → 18 sections → ~47.25 ft of track
• 100 ft kit → 36 sections → ~94.5 ft of track
• 150 ft kit → 54 sections → ~141.75 ft of track
• 200 ft kit → 72 sections → ~189 ft of track
You will still have a mounting hole for every light in your ASAHOM kit. The small difference in overall length is simply due to fixed aluminum section sizing.
Free shipping on orders over $200
Product not available in Canada
Clean Install with Aluminum Track for ASAHOM Pro Lights
This custom aluminum track for ASAHOM Pro (S1080) permanent outdoor lights is engineered to create a continuous mounting channel that keeps every LED evenly aligned and securely installed along your soffit.
Unlike tape or clip-based installations that tend to fall down over time, this ASAHOM permanent light track supports the entire run of lights, reducing movement over time and delivering a straighter, more professional finish.
Built from powder-coated aluminum, this mounting system is designed for long-term outdoor durability in all U.S. climates.
Affordable at $2.75 per foot and trusted by DIY homeowners and professional installers across the U.S.
Features
Precision-fit aluminum track for ASAHOM Pro (S1080)
Low-profile soffit mounting channel
Powder-coated aluminum resists rust and fading
- Holds ASAHOM Pro lights tightly in place
Easily cut to length with standard tin snips or a miter saw
Package Contents
Track quantity and total length are matched to your selected ASAHOM Pro permanent outdoor light kit.
If you order 100 ft of ASAHOM Pro lights, select 100 ft of aluminum track.
Aluminum Channel Sections
Length: 31.5″ (0.8 m) per section
Width: 34 mm (1.34″)
Height: 22 mm (0.87″)
LED hole spacing: 40 cm (15.75″)
Screw not included
How to Install ASAHOM Light Track in an Afternoon
This ASAHOM Pro aluminum track system is designed for clean, long-term soffit mounting of permanent outdoor lights. With pre-drilled mounting holes and simple screw installation, this aluminum track for ASAHOM permanent lights can be completed in just a few hours. No adhesives. No clips. Just straight, clean alignment along your soffit.
Step 1
Create a Guide Piece
Cut a 3–4 inch section from one aluminum channel. Use this as a guide to mark your install path and keep your ASAHOM permanent outdoor lights aligned evenly from start to finish.
Step 2
Mark a Straight Line
Use chalk and your guide piece to trace a straight path along your soffit or fascia. This ensures your ASAHOM light track installs clean and level without dips or crooked sections.
Step 3
Mount the Back Channel
Start with the short guide piece you created. Secure it in place, then continue installing the remaining aluminum track sections end-to-end. Use the pre-drilled mounting holes for consistent spacing and clean alignment.
Step 4
Load the LEDs
Insert the ASAHOM Pro (S1080) light heads into the aluminum channel one at a time. Align each LED with the mounting holes to ensure even spacing and a professional finish.
Step 5
Snap Into Place
Press the front channel into the mounted back channel until it clicks into place. The aluminum track locks the ASAHOM Pro lights securely, creating a continuous soffit-mounted lighting system.
Bonus Tip
Trim & Finish as You Go
Cut track sections as needed to fit corners, transitions, or tight overhangs. A miter saw provides the cleanest cuts, but standard tin snips work well for most adjustments.
Common Questions
Find answers to common questions about our aluminum track for ASAHOM permanent outdoor lights.
Reviews
See what customers are saying about our aluminum track for permanent outdoor lights.
Verified ownerYour product was very easy to install it looks great. It was delivered on time. I would recommend it to anybody that needs to install govee lights.
Verified ownerperfect & thank you
Verified ownerEverything came in very fast! Happy with our purchase
Verified ownerGreat tracking, sometimes arrives a bit bent
Verified ownerWorks and looks really nice. A real clean look.
Verified ownerExcellent purchase! I did my installation in October 2025 and I'm very satisfied with the results. These tracks are excellent quality, easy to install and looks nice after on the soffits!
Verified ownerThey worked really well fit perfect easy to install
Verified ownerI would suggest that if this your first time, buy some cheap aluminum channel and learn to cut angles on it before you start. I messed mine up because of lack of experience so the angles aren't looking too great. I used a 36t hacksaw blade which was a nightmare. I don't have a miter saw but I think a Dremel would have worked better. I'm still trying to figure out how to cover these angled gaps. Wish there was a cap I could buy to cover them. It's better than having the wires exposed though and the straight channels look good. It's just the angles that make me wish I practiced more.